Canopus TwinPact 100, User Manual

Page: 68 / 68

58
T T
T T
Troubleshooting roubleshooting
roubleshooting roubleshooting
roubleshooting
If you have found any troubles, check the following points before con-
tacting us for repair.
Symptoms Cause/Action
Pressing the POWER
switch does turn ON
t h e Tw i n Pa c t 1 0 0
power. > Check that the AC adapter is connected to
the DC IN 5V connector and the receptacle.
T h e S TAT U S L E D
blinks when the power
is turned ON. > An anomaly on the TwinPact 100 unit is
suspected. Contact our customer support
personnel.
Video and audio are
not output. > Check if the POWER switch is ON. Check
that this product and DV/analog devices
are properly connected.
No sound is input (out-
put) when the RGB sig-
nal is input. > Check if the Audio Input setting (Mode
Switch Selector A No. 4) is correct.
It cannot record video. > If the video input or audio data contains
copyright protection signals, it cannot be
recorded properly.
The Twin Commander
menu is shown only in
part. > Check if the TwinPact 100 is connected and
restart the Twin Commander.
The TwinPact 100
does not respond to
the remote controller. > Set the Mode Switch Selector A No. 3
(Scan Converter Control setting) to ON
(Remote Controller).
The computer screen
looks dim or any of the
RGB elements looks
dim. > Set the RGB Termination setting (Mode
Switch Selector A Nos. 6, 7, and 8) to OFF.