Canopus TwinPact 100, User Manual

Page: 17 / 68

7
(6) REMOTE LED
Lights (for about 0.1 sec.) when the TwinPact 100 receives the
remote controller signal.
(7) AUDIO IN L/R
Input terminal for analog audio.
This terminal can also be used as RGB audio input terminal by
setting the Mode Switch Selector A No.4 to ON.
(8) VIDEO IN
Input terminal for composite video.
(9) S VIDEO IN
Input terminal for S video.
(10) DV IN/OUT
Terminal for DV connection (4-pin). Connect this terminal to a
DV device or computer.
NOTE
When both VIDEO IN and S VIDEO
IN terminals are used, the S
VIDEO terminal is always used.
Rear Rear Rear Rear Rear
(1) (2) (3) (4)
(8) (9)
(6) (7) (5)
(1) DV IN/OUT
Terminal for DV connection (6-pin). Connect this terminal to a
DV device or computer.
(2) S VIDEO OUT
Output terminal for S video.
(3) VIDEO OUT
Output terminal for composite video.
(4) AUDIO OUT L/R
Output terminal for analog audio.
NOTE
Do not connect DV cameras and
such to both of the front and rear
DV terminals at the same time
(HUB connection not allowed.).