Canopus TwinPact 100, User Manual

Page: 38 / 68

28
Capturing analog video into computer Capturing analog video into computer Capturing analog video into computer Capturing analog video into computer Capturing analog video into computer
Press the [POWER] switch on the rear.
1
1
By pressing the [INPUT SELECT] switch on the front,
switch the input mode to ANALOG IN.
> The ANALOG LED will light.
3
Start playing back the analog video you want to cap-
ture from a point a little before the part you need.
4
Capture the video on your computer.
> For how to capture the video on your computer, consult
the user's manual of the software you are using.
5
Audio sampling frequency during
capturing
You can select your desired au-
dio sampling frequency during
capturing from 48 kHz (16-bit) and
32 kHz (12-bit). Make the setting
on the Mode Switch Selector.
Refer to “Mode Switch Selector
B” (P.36).
Tip
Start up the computer.
2
2
3
4
5