Canopus TwinPact 100, User Manual

Page: 52 / 68

42
Other Other
Other Other Other
(1) (2)
(3)
(4)
(7)
(8)
(10)
(5)
(6)
(9)
(11)
(1) Input Select key
Allows you to select the input mode from DV, analog, and RGB.
Every time you press the Input Select key, the mode changes in
the following order:
• RGB > DV > Analog > RGB > ...
When the input mode is changed, the LED for the mode lights
up.
(2) Test Pattern key
Outputs a test pattern (color bar signal). Every time the Test
Pattern key is pressed, the test pattern changes in the following
order:
• 100% Color Bar > Cross Hatch > Red Gradient
> Green Gradient > Blue Gradient> All Waveforms
> 100% Color Bar > ...
To cancel the test pattern display, press either of the OK, Input
Select, or Reset key.
(3) Up key, (4) Left key, (6) Right key, (7) Down key
Press these keys to change the values during adjustment.
(5) OK key
Press this key during the adjustment to select the adjusting
setting. Press this key when the test pattern is displayed to
finish the test pattern, and then return to the previous screen.
If the Test Pattern key is pressed
during adjustment, the current
adjustment mode is canceled.
Tip