74
13.14 Zoom Hi Wide
Camera Control Command Type 2
Function
Move the zoom to WIDE side at the zoom speed 7 (the maximum high speed).
Command 00A2h
Length 1
byte
Parameter
Value 3h
Status None
Reference •
Flags in Zooming of Operation Status Request
comes out 1.
•Possible to stop running by
Zoom Stop
command.
•To stop running at the zoom operation limit point (Wide), and
Flag in
Zooming
comes out zero.
•To return notification at the moment of reaching to zoom operation limit
point (Wide).
Note:
When zoom position reached to the zoom operation limit position of wide
end,
Flag in Zooming
doesn't come out 1 because of not zoom running.
Format of Control Code
d0 d1 d2 d3 d4 d5 d6
Header
Device Num
Command
Parameter End mark
FFh 30h 3Xh 00h A2h 33h EFh
Answer Format
d0 d1 d2 d3 d4 d5
Header
Device Num
Error Code
End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
In case of No Error :
00000000B
⇒
00h
⇒
30h 30h
In case of Busy :
00010000B
⇒
10h
⇒
31h 30h
In case of Mode Error :
10010000B
⇒
90h
⇒
39h 30h
Condition of Error flag to be set
Busy
•In process of camera initializing operation by
Camera Reset
command, etc.
•In process of zooming operation.
•In process of focus operation by manual.
•In case of executing
Preset Move
command.
Mode Error
•Not in status of
Camera ON.
•Not in status of
Host Control Mode.
