Canon VB-C50I, User Manual

Page: 34 / 233

2-6
Turning the Power ON and OFF
The VB-C50i/VB-C50iR itself does not have a power switch. You can switch the VB-C50i/VB-
C50iR on by plugging the AC adapter into a wall outlet. The LED flashes when the VB-C50i/VB-
C50iR is communicating. When the power supply is turned ON, the LED momentarily flashes.
Note
●
The camera head position is automatically initialized when the power supply is
turned ON from OFF.
●
Never touch the camera head during initialization as this could prevent
successful initialization and cause faults.
●
Wait at least 5 seconds before turning the power back on after shutting it off. Turning
it on too quickly may result in a malfunction. Observe the precautions given in “
a
Safe Use of Equipment/
a
IMPORTANT SAFETY INSTRUCTIONS” (
→
P.xii).
●
If the picture recording function is being used, shutting off the power or
restarting the VB-C50i/VB-C50iR will cause all pictures to be deleted.
2. Connect the Camera to the Network
Next, connect the camera. Connect the camera to the network by connecting the camera and PC
via the hub with a LAN cable .
* Do not plug the AC cable power
plug into the wall socket yet.
LAN cable
AC cable
(Rear of main unit)
AC adapter
Hub
PC
AC cable
to AC outlet
AC adapter
Main unit
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The network connection is now complete.