manualshive.com logo in svg

Canon VB-C50I, User Manual

The Canon VB-C50I is an advanced surveillance camera with versatile features for capturing high-quality video footage. Access the comprehensive User Manual to fully understand its functionality, available for free download at manualshive.com. Maximize the potentials of this remarkable product with our detailed manual.

Share
Download
background image

5-20

Using the Viewer for Java to Distribute Videos

Tip

When specifying an address included in the codebase attribute of the applet tag and

a URL parameter of the LiveApplet, specify one that can be accessed from the client’s

PC. This is particular necessary when using NAT (

→

 P.5-26).

Specify LiveApplet.zip or Glimpse.zip.

Yes

archive

This parameter specifies the applet file name. Enter “LiveApplet.class” or 
“Glimpse.class”. If this parameter is not specified correctly, the applet 
(LiveApplet or Glimpse) is not downloaded.

No

code

This parameter specifies the directory that contains the applet. 
http://HTTP server IP address: port number/directory/
If this parameter is not specified correctly, the applet (LiveApplet or Glimpse) is 
not downloaded. 
Directories are fixed for each applet.
Directory (LiveApplet)=-wvdoc-01-/LiveApplet
Directory (Glimpse)=-wvdoc-01-/Glimpse

No

codebase

This parameter specifies the size of the area acquired for the applet (in pixels).
For LiveApplet, if the value specified is smaller than the LiveApplet drawing 
area, the applet may not be displayed correctly. If the camera control function 
GUI is to be added (controller_style=normal), add about 140 to the value. Eg. 
For an image size of 320 

×

 240, height=380.

For Glimpse, because the areas used for the applet and for the video display 
are the same size, specify the same value as the image height. Eg. For an 
image size of 320 

×

 240, hright=320.

No

height

This parameter specifies the size of the area acquired for the applet (in pixels).
For LiveApplet, if the value specified is smaller than the LiveApplet drawing 
area, the applet may not be displayed correctly. If the camera control function 
GUI is to be added (controller_style=normal), add about 130 to the value. Eg. 
For an image size of 320 

×

 240, width=450.

For Glimpse, because the areas used for the applet and for the video display 
are the same size, specify the same value as the image width. Eg. For an 
image size of 320 

×

 240, width=320.

No

width

Description

Omissible

Attribute Name

Applet Tag Descriptions

Summary of Contents for VB-C50I










































































































































































































































Reviews:

No comments

Related manuals for VB-C50I

Samsung SMARTCAM SNH-1011N Quick Start Manual preview
SMARTCAM SNH-1011N
Brand: Samsung Pages: 2
UEi CD200 Instruction Manual preview
CD200
Brand: UEi Pages: 6
Halma Apollo Marine 65 Series Quick Start Manual preview
Apollo Marine 65 Series
Brand: Halma Pages: 2
olympia electronics BSR-6060/A/MAR Quick Start Manual preview
BSR-6060/A/MAR
Brand: olympia electronics Pages: 2
Varian PHD-4 Instruction Manual preview
PHD-4
Brand: Varian Pages: 41
Dahua D-IPC-HDW3449HP-AS-PV-0280B Quick Start Manual preview
D-IPC-HDW3449HP-AS-PV-0280B
Brand: Dahua Pages: 20
Idis DC-D4213WRX Quick Manual preview
DC-D4213WRX
Brand: Idis Pages: 19
Novus NVIP-6F-6301 User Manual preview
NVIP-6F-6301
Brand: Novus Pages: 40
Eaton FHF DSLB 20 LED Technical Manual preview
FHF DSLB 20 LED
Brand: Eaton Pages: 28
System Sensor SpectrAlert S1224MCW Installation And Maintenance Instructions preview
SpectrAlert S1224MCW
Brand: System Sensor Pages: 4
Abus IPCB72501 Installation Manual preview
IPCB72501
Brand: Abus Pages: 18
Zip SEE862 Instruction Manual preview
SEE862
Brand: Zip Pages: 14
SCW Admiral Line Software Operation Manual preview
Admiral Line
Brand: SCW Pages: 119
Zavio D4210 Quick Installation Manual preview
D4210
Brand: Zavio Pages: 16
360 Vision PRED-3M Installation & Configuration Manual preview
PRED-3M
Brand: 360 Vision Pages: 28
Xintex G-1BB-24-R Owner'S Manual & Installation Instructions preview
G-1BB-24-R
Brand: Xintex Pages: 9
D+H REM 801-RC Original Instructions preview
REM 801-RC
Brand: D+H Pages: 2
Qian JING BAO SS5500 User Manual preview
JING BAO SS5500
Brand: Qian Pages: 70

Brands by name

Popular brands

Load more brands