COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-21
006
telephone line monitor
Use it to s the telephone line monitor function:
0: generate the monitor sound of the telephone line using the speaker from the start of
transmission to DIS.
1: generate the monitor sound of the telephone line using the speaker from the start of
communication to the end of it.
2: generate the monitor sound of the telephone line2 (Option).
3: do not generate the monitor sound of the telephone line usng the speaker.
007
ATT transmission level
Use it to set the transmission level (ATT).
Raise the transmission level if errors occur frequently at time of communication because
of the condition of the line. (It means close to 8)
Memo
Any of the following error codes may be indicated at time of transmission
because of the line condition:
##100, ##101, ##102, ##104, ##201, ##280, ##281, ##282, ##283, ##284,
##750, ##752, ##754, ##755, ##757, ##759, ##760, ##762, ##764, ##765,
##767, ##769, ##770, ##772, ##774, ##775, ##777, ##779, ##780, ##782,
##784, ##785, ##787, ##789
Any of the following error codes may be indicated at time of reception be-
cause of the line condition:
##103, ##106, ##107, ##201, ##793
008
V.34 modulation speed upper limit
Use it to set an upper limit to the modulation speed (baud rate) for the V.34 primary
channel.
009
V.34 data speed upper limit
Use to set an upper limit to the data transmission speed for the V.34 primary channel be-
tween 2.4K and 33.6K bps in increments of 2400 bps. (0: 2.4K to 13: 33.6K bps).
