COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-14
#1 SSSW-SW9: display setting
Bit
Function
1
0
Factory setting
0
communication result display
Retain
Do not retain
0
(normal end)
1
communication result display
Retain
Do not retain
0
(error end)
2
not used
-
-
3
not used
-
-
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
not used
-
-
[Bit 0]
Use it to enable/disable retention of the display of the communication result when the
communication ends normally. When ‘do not retain’ is selected, the display will be removed
in 10 sec after the end of the communication. When ‘retain’ is selected on the other hand,
the display will remain until any key is pressed.
[Bit 1]
Use it to select how the display of the communication result may be removed when the
communication ends in error. When ‘do not retain’ is selected, the display will be removed
in 10 sec after the end of the communication. When ‘retain’ is selected on the other hand,
the display will remain until any key is pressed.
