COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-3
<1/7>
<READY>
Report
Sssw
Menu Num Ncu Type
ISDN
Print Clear Test
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
SW01
SW02
SW03
SW04
SW05
SW06
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
SW07
SW08
OK
Press to accept the current input.
Previous Page/Next Page key
1.3 Guide to the Keys
The following cites the #1 SSSW screen for discussion. The same meanings and methods
of operation apply to all screens.
F05-103-01
•
In the case of a bit switch, press the desired bit (number) directly to change from 0 to 1
or from 1 to 0.
•
To change a value or to execute an item, press the OK key.
•
To enter a numerical input, use the keypad.
•
To return to the previous level, Press the Reset key.
If you ever change service mode settings, be sure to turn off and then on the
main power. The settings made in service mode are stored on the host’s
hard disk. The settings related to the Board are loaded from the hard disk to
the G3 fax control PCB, requiring that that main power be turned off and
then on again whenever a change has been made.
