COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-26
6 Selecting the Country (#5 TYPE)
When the type shown on the display is set, all the service data is set to match each coun-
try domestic telecommunication standards.
7 Setting Printer Functions (#7 PRINTER)
7.1 Service Software Switches
#7 Printer-SW05 (reduction, cassette selection)
Bit
Function
1
0
Factory setting
0
priority on LTR
place
do not place
0
1
priority on LGL
place
do not place
0
2
not used
-
-
3
not used
-
-
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
priority on recording in sub
scanning direction
place
do not place
0
[Bit 0, 1]
Use it to enable/disable placement of priority on LTR paper when an image that may be
printed at 100% or in even division on A4, LTR, or LGL is received.
The setting of bit 0 and bit 1 affects the order of priority as follows:
Bit1 Bit2
Priority of recording paper
0
0
A4 -> LTR -> LGL
0
1
LTR -> A4 -> LGL
1
0
LGL -> LTR -> A4
1
1
LTR -> LGL -> A4
However, when priority is on recording in sub scanning direction, the order will be as fol-
lows even when bit 1 and bit 0 are set to ‘0’: LTR 0> A4 -> LGL.
[Bit 7]
Use it to enable/disable placement of priority on recording in sub scanning direction.
place:
if B4 recording paper and A4 recording paper are set and an A4 extra-
long image* is received, printing will be on the B4 recording paper.
do not place:
if B5 horizontal recording paper and A4 recording paper are set and a
B4 image is received, printing will be by division and on B5 horizontal
recording paper.
*Image B4 or shorter and that cannot be printed by division and on A4 recording paper.
