CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
2-34
Bit
0
1
2
3
4
5
6
7
Function
not used
echo product tone in high-
speed transmission
not used
not used
not used
not used
not used
tonal signal before transmis-
sion of CED signal
1
-
transmit
-
-
-
-
-
transmit
0
-
do not transmit
-
-
-
-
-
do not transmit
Factory setting
0
0
0
[Bit 1]
Use it to specify whether or not to transmit an echo protection tone for high-speed transmis-
sion V.29 (9600 or 7200 bps; modem signal).
If an error occurs often because of a line condition at time of transmission, set it to ‘1’. If set
to ‘1’, unmodulated carrier will be transmitted as a sync signal before transmission of an im-
age for about 200 msec.
Memo
The following error codes are associated with a line condition at time of
transmission:
##100, ##104, ##281, ##282, ##283, ##750, ##755, ##760, ##765
[Bit 7]
Use it to specify whether or not to transmit a 1080-Hz tonal signal before transmission of
the CED signal. Set it to ‘1’ if an error occurs often because of an error at time of reception.
Memo
The following error codes are associated with an echo at time of reception:
##005, ##101, ##106, ##107, ##114, ##200, ##201, ##790
#1 SSW-SW03:
echo remedy setting
