Canon PowerShot S30, User Manual

Page: 250 / 275

85
Macintosh
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Shooting with RemoteCapture
RemoteCapture will start if you click the [Edit] menu in ImageBrowser and select
[RemoteCapture] when the camera is connected to the computer via a USB interface.
RemoteCapture lets you control the camera’s shutter remotely from the computer to
shoot still images.
• You can also press the camera’s shutter button directly when the camera is
connected to the computer via the USB interface to load the recorded images
directly onto the computer. (However, you will have to wait until the image
data is transmitted to the computer before you can take a second shot.)
• Only the shutter button can be used on the camera while it is connected via
the USB interface to the computer. The other buttons and switches, including
the zoom lever, will not operate. Use the RemoteCapture functions instead.
• You may notice that the interval between the shutter release and activation is
slightly longer when RemoteCapture is used to shoot than when the camera
is used in the normal fashion.
• Images shot with RemoteCapture are automatically saved to the folder
selected in ImageBrowser.
• You cannot use RemoteCapture when the USB Mounter is running (p. 94).
• Save-RemoteCapture Window
View Button
Select an image in the Thumbnail View and click
here to display it in the Image Display Area.
Delete Button
Select an image in the Thumbnail View and click
here to delete it. Since it is deleted from the
computer too, ensure that you have the correct
image.
Histogram
Check the distribution of brightness data here.
Image Information
Check the image settings here.
Comments
Add a comment about the image here.
Thumbnail View
Displays thumbnails of all the images
shot after RemoteCapture is started.
Connect/Disconnect Button
Click here to open a connection to the camera
and display the RemoteCapture Shooting
window. It will change to the Disconnect button
while a connection is open. Click it to close the
connection.
Image Display Area
Displays the image selected in the Thumbnail View.