Canon PowerShot S30 Page 102 User Manual Download

Page: 102 / 275

100

Replaying

Automated Playback (Slide Show) (continued)

Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 100 images may be
marked per slide show. Images display in the order of their selection.

Display the slide show menu (p. 99).

Select [Program] using

on the

multicontroller. Then select [Show 1],
[Show 2] or [Show 3] using

the multicontroller.

• A bright green bar will appear beside a show

already containing images.

Choose [Select] using

, and

on the multicontroller and

press

Mark images to include in the show.

Single Replay

• Move between images using

on the

multicontroller and mark or remove marks from
images using

on the multicontroller.

• The selection number and a bright green bar

appear at the top of marked images.

Index Replay

• Press the

button to switch to index replay (3

images).

• Select an image using

on the

multicontroller and mark or remove marks from
images using

on the multicontroller.

• The selection number and a bright green bar

appear at the bottom of marked images.

• You can deselect all the images in a show by

pressing

, selecting [OK] using

the multicontroller and pressing

again.

Summary of Contents for PowerShot S30




















































































































































































































































































Search results

Summary of Contents for PowerShot S30

Reviews:

Related manuals for PowerShot S30

Brands by name

Popular brands

Canon PowerShot S30, User Manual

Search results

Summary of Contents for PowerShot S30

Reviews:

Related manuals for PowerShot S30

Brands by name

Popular brands