Canon Pixma PRO-100S series Online Manual Download Page 153

Page: 153 / 617

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.

Replace the ink

tank

whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.

Important

• The manual feed tray is not available for the nozzle check pattern print procedure. Be sure to load

paper in the rear tray.

3. Open the paper output tray gently, then pull out the output tray extension.

Important

• If the disc tray guide is open, be sure to close it.

4. Hold down the

RESUME/CANCEL

button until the

POWER

lamp flashes twice, then

release it immediately.

The nozzle check pattern will be printed.

Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

Examine the nozzle check pattern

153

Summary of Contents for Pixma PRO-100S series










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma PRO-100S series

Reviews:

Related manuals for Pixma PRO-100S series

Brands by name

Popular brands

Canon Pixma PRO-100S series, Online Manual

Search results

Summary of Contents for Pixma PRO-100S series

Reviews:

Related manuals for Pixma PRO-100S series

Brands by name

Popular brands