manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 932

A Message Is Displayed

This section describes some of the errors or messages.

Note

• A Support Code (error number) is displayed on the computer or on the touch screen for some error or

message. For details on errors with Support Codes, refer to 

Support Code List

.

If a message is displayed on the touch screen, see below.

•

A Message Is Displayed on the touch screen

If a message is displayed on the computer, see below.

•

Error Regarding Automatic Duplex Printing Is Displayed

•

Error Regarding the Power Cord Being Unplugged Is Displayed

•

Writing Error/Output Error/Communication Error

•

Other Error Messages

•

The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed

A Message Is Displayed on the touch screen

Confirm the message and take an appropriate action.

•

Data of supported types are not saved.

◦ There is no image data or document saved on the memory card that can be read by this machine.

◦ The machine may not recognize the file if the file name or folder path contain certain characters.

Use only alphanumeric characters.

◦ Photo data edited or processed on a computer must be printed from the computer.

Note

• When a photo which has been processed on a computer is selected, "?" is displayed on the

touch screen.

•

Cannot print the specified PDF file. An error has occurred while scanning the file,
or the format is not supported, or the file is too large.

◦ Make sure the PDF file is printable from a memory card. See Printing Documents (PDF File)

Saved on a Memory Card for more information.

Note

• The names of the PDF files are displayed even though they cannot be printed from the

memory card. It is recommended you confirm whether they are printable. If one of the
following conditions applies to the PDF files, they are not printable.

• The 

Details

 screen is not displayed for the PDF file you want to print.

• Characters other than machine name, 

IJ Scan Utility

, or 

My Image Garden

 are

displayed on 

Created with

 on the 

Details

 screen.

• "?" is displayed on the preview screen.

◦ Data edited or processed on a computer must be printed from the computer.

122

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands