manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 809

Scanning with the Access Point Mode

When the machine enters the access point mode, you can scan from an external device such as a computer
or a smartphone without involving an access point.

Important

• Before you use the machine with the access point mode, be sure to specify the access point name of

the machine and the security setting.

Before Using the Machine with the Access Point Mode

1. Make sure that the machine is turned on.

2. Flick the HOME screen, then tap 

 

WLAN

.

Using the Operation Panel

3. Tap 

Access point mode

.

4. Check the message that is displayed, then tap 

OK

.

The machine enters the access point mode.

5. Connect an external device such as a computer or a smartphone to the machine via wireless

LAN.

Perform wireless LAN settings with your external device, then assign the access point name specified for
the machine as a destination.

Note

• For details on how to perform wireless LAN settings with an external device, refer to the device's

instruction manual.

• While the machine is in the access point mode, the access point name specified for the machine is

displayed on the touch screen.

When you specify the machine as a destination for wireless connection to an external device,
assign the access point name specified for the machine.

• While the machine is in the access point mode, tapping 

Details

 displays the details on the security

setting.

When a WPA2-PSK (AES) passphrase is valid, entering the passphrase is required to connect an
external device to the machine via wireless LAN. Enter the passphrase specified for the machine.

6. Load the original on the platen glass.

7. Start scanning from an external device such as a computer or a smartphone.

Perform scanning operations from the external device and specify the machine as a scanner you use.

219

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands