manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 822

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.

Check9

 Make sure that the channel set to the access point is valid to communicate

with the computer, confirmed in Check 8.

If not, change the channel set to the access point.

Check10

 Make sure that the firewall of the security software is disabled.

If the firewall function of your security software is turned on, a message may appear warning that Canon
software is attempting to access the network. If the warning message appears, set the security software to
always allow access.

If using any programs that switch the network environment, check their settings. Some programs will enable a
firewall by default.

Check11

 When using a router, connect the printer and computer to the LAN side

(same network segment).

If the problem is not resolved, perform setup with the Setup CD-ROM or perform it according to the
instructions on our website.

•

For placement:

Make sure that there is no barrier or obstacle between the access point and the machine.

Cannot Communicate with the Machine over the Wired LAN

Check1

 Make sure that the machine is turned on.

Check2

 Make sure that the LAN cable is connected properly.

Make sure that the machine is connected to the router with the LAN cable. If the LAN cable is loose, connect
the cable properly.

If the LAN cable is connected to the WAN side of the router, the cable is connected to the LAN side of the
router.

If the problem is not resolved, perform setup with the Setup CD-ROM or perform it according to the
instructions on our website.

Cannot Print, Scan, or Access the Card Slot from a Computer Connected to
the Network

Check1

 Make sure that the network settings of the computer are correct.

For the procedures to set up the computer, refer to the instruction manual of your computer or contact its
manufacturer.

Check2

 If the MP Drivers are not installed, install the MP Drivers.

Install the MP Drivers with the Setup CD-ROM or install them from our website.

12

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands