manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 339

Deleting a Print Job

To delete a print job with AirPrint, use one of the following two methods:

• From the machine: Use the operation panel of the machine to cancel the print job.

• From an Apple device: Press the 

Home

 button on the Apple device twice. Tap the 

Print

 icon and display the print job

list. Tap the print job to be canceled, and then tap 

Cancel Print

.

AirPrint Troubleshooting

If the document does not print, check the following:

1.

Check that the machine power is on. If the machine power is on, turn it off and then back on
again, and check whether the issue is resolved.

2.

Check that the machine is connected by LAN to the same network subnet as the device on
which iOS is installed.

3.

Check that the machine has enough paper and ink.

4.

Check that no error message is displayed on the machine operation panel.

If the problem persists, use the printer driver on your computer to execute printing and check whether the
document can be printed normally on the machine.

If the document cannot be printed, refer to the 

Online Manual

 for your model.

Note

■

After you turn on the machine, it may take few minutes before the machine can communicate through a wireless LAN
connection. Confirm that the machine is connected to the wireless LAN, and then try printing.

■

If Bonjour on the machine is disabled, AirPrint cannot be used. Check the LAN settings on the machine, and enable
Bonjour.

Note

■

The windows used in the explanations may differ from those displayed by your Apple product or application software.

86

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands