manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 480

Reducing the Machine Noise

The silent function allows you to reduce the operating noise of this machine. Select when you wish to reduce the operating
noise of the printer at night, etc.
Using this function may lower the print speed.

The procedure for using the quiet mode is as follows:

 Quiet Settings

1.

Open the printer driver setup window

2.

Click 

Quiet Settings

 on the 

Maintenance

 tab

The 

Quiet Settings

 dialog box opens.

Note

■

If the machine is off or if communication between the machine and the computer is disabled, an error
message may appear because the computer cannot collect the machine status.

3.

Set the quiet mode

If necessary, specify one of the following items:

Do not use quiet mode

Select this option when you wish to use the machine with volume of normal operating noise.

Always use quiet mode

Select this option when you wish to reduce the operating noise of the machine.

Use quiet mode during specified hours

Select this option when you wish to reduce the operating noise of the machine during a specified period of time.
Set the 

Start time

 and the 

End time

 of the quiet mode you wish to be activated. If both are set to the same time,

the quiet mode will not function.

Important

■

You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner
driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations from the
operation panel of the machine or printing and scanning from the computer.

■

If you specify a time for 

Use quiet mode during specified hours

, quiet mode is not applied to operations

(copy, direct print, etc.) performed directly from the machine.

4.

Apply the settings

Make sure that the machine is on and click 

OK

.

Click 

OK

 when the confirmation message appears.

The settings are enabled hereafter.

Note

■

The effects of the quiet mode may be less depending on the print quality settings.

227

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands