manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 933

•

The specified PDF file contains unprintable data. Some portions may not be
printed.

PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before
printing is completed. In this case, print from the computer.

•

The card is currently writable from PC. Set to [Not writable from PC].

The card slot is set to 

Writable from USB PC

 or 

Writable from LAN PC

.

You cannot print from the memory card or save the scanned data to the memory card when the card
slot is set to 

Writable from USB PC

 or 

Writable from LAN PC

. After writing on the memory card,

select 

Not writable from PC

 in 

Read/write attribute

 under 

Device user settings

.

•

Power was not turned off correctly the last time. Press the 

 button when

turning power off.

The power cord may have been unplugged last while the machine was still on.

Tap 

OK

 on the touch screen to dismiss the error.

Note

• See Notice for Unplugging the Power Cord for unplugging the power cord.

•

Cannot connect to the server. Please wait a while and try again.

You cannot connect to the server due to some communication error. When you have tried to access a
photo sharing site, it is possible that your photos have been deleted.

Tap 

OK

 on the touch screen to dismiss the error, then try again after a while.

Error Regarding Automatic Duplex Printing Is Displayed

Check

 See 

Cannot Print Properly with Automatic Duplex Printing

 and take the

appropriate action.

Error Regarding the Power Cord Being Unplugged Is Displayed

The power cord may have been unplugged while the machine was still on.

Check the error message that appears on the computer, then click 

OK

.

The machine starts printing.

See Notice for Unplugging the Power Cord for unplugging the power cord.

Writing Error/Output Error/Communication Error

Check1

 If the 

POWER

 lamp is off, make sure that the power plug is plugged in, then

turn the machine on.

While the 

POWER

 lamp is flashing, the machine is initializing. Wait until the 

POWER

 lamp stops flashing and

remains lit.

Check2

 Make sure that the printer port is configured appropriately in the printer driver.

* In the following instructions, "XXX" signifies your machine's name.

123

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands