Canon PIXMA G4570, Online Manual

Page: 195 / 601

Print settings
Select this setting item from Device settings in Settings .
• Prevent paper abrasion •
Use this setting only if the print surface becomes smudged.
Important
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower •
print quality.
• Amount of extension •
Selects the amount of image that extends off the paper when printing in borderless (full).
When performing Borderless Printing, slight cropping may occur at the edges since the printed image is
enlarged to fill the whole page. You can change the width to be cropped from the borders of the original
image as needed.
Important
• Settings will become ineffective in the following situations: •
Printing from a PictBridge (Wi-Fi) supporting device.
Printing from a standard form.
Note
• When performing settings from application software or the printer driver, these settings will be •
prioritized.
• If printouts contain margins even though you are printing in Borderless, specifying Extended •
amount: Large for this setting may help solve the problem.
• Auto photo fix setting •
When ON is selected, you can select whether to print photos using the Exif information recorded in the
image files when Default * or On is selected in printing with a PictBridge (Wi-Fi) compliant device.
* When Default is selected for the print setting on the PictBridge (Wi-Fi) compliant device, select Auto
photo fix for photo fix in PictBridge settings .
195