N: New adjustment item
*1: Only for CD / DVD printing supported regions.
*2: New Service Tool that operates only on a pre-registered computer.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
- At logic board replacement
- At platen unit replacement
To correct line feeding (eject
roller diameter).
Service Tool
*2
Perform in the service
mode.
and Eject
correction is
performed
at the same
time.)
N
Carriage rail
position adjustment
- At carriage unit replacement
- At carriage unit removal
To set the carriage rail to the
original position prior to removal
or replacement of the carriage
unit, put a mark on the main
chassis before removal of the
carriage unit.
None.
1 min.
- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
- For the automatic print head alignment, use Matte Photo Paper (MP-101), which is packed with the machine before
shipment. If Matte Photo Paper (MP-101) is not available, perform manual print head alignment using plain paper.
2 / 45
