Canon MP630 SERIES, Service Manual

Page: 7 / 47

2. LIST OF ERROR DISPLAY / INDICATION
Errors and warnings are displayed by the following ways:
1. Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in text
and by icon.
2. Messages during printing from a computer are displayed on the MP driver Status Monitor.
3. Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service call error record" area in EEPROM
information print
Buttons valid when an operator call error occurs:
1. ON button: To turn the machine off and on again.
2. OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the cause
of the error is eliminated, and pressing the OK button may not be necessary.
3. Stop button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
MP630 / MP638 TABLE OF CONTENTS
Error
Error
code
U No.
Message on the LCD Solution
No paper in the rear tray. [1000] --- Rear tray.
There is no paper. Load paper and press
[OK].
Confirm that the rear tray is selected as the paper source.
Set the paper in the rear tray, and press the OK button.
No CD / DVD tray
*1
.
[1001] --- There is no CD-R tray. Attach the tray
and press [OK].
Set the CD / DVD tray, and press the OK button.
No CD or DVD
*1
.
[1002] --- Printable disc is not set. Correctly place
a disc in the CD-R tray and press [OK].
Set a CD or DVD in the CD / DVD tray, and inset the
CD / DVD tray in the proper position. Then, press the OK
button.
No paper in the cassette. [1003] --- Cassette.
There is no paper. Load paper and press
[OK].
Confirm that the cassette is selected as the paper source.
Set the paper in the cassette, and press the OK button.
Paper jam. [1300] --- The paper is jammed. Clear the paper
and press [OK].
Remove the jammed paper, and press the OK button.
Paper jam in the rear
guide.
[1303] ---
Paper jam in the under
guide.
[1304] ---
Ink may have run out. [1600] U041 The following ink may have run out.
Replacing the ink tank is recommended.
Replace the applicable ink tank, or press the OK button to
clear the error without ink tank replacement. When the
error is cleared by pressing the OK button, ink may run
out during printing.
Ink tank not installed. [1660] U043 The following ink tank cannot be
recognized.
(Applicable ink tank icon)
Install the applicable ink tank(s) properly, and confirm
that the LED's of all the ink tanks light red.
Print head not installed, or
not properly installed.
[1401] U051 Print head is not installed. Install the
print head.
Install the print head properly.
Faulty print head ID. U052 The type of print head is incorrect.
Install the correct print head.
Re-set the print head. If the error is not cleared, the print
head may be defective. Replace the print head.
Print head temperature
sensor error.
[1403]
Faulty EEPROM data of
the print head.
[1405]
Inner cover error.
[1841
*2
,
1846
*2
,
1851
*1
,
1856
*1
]
--- Inner cover is open. Close the inner
cover and press [OK].
Close the inner cover, and press the OK button.
[1850
*1
,
1855
*1
]
--- Open the inner cover, place the CD-R
tray and press [OK].
Open the inner cover which functions as the CD / DVD
tray feeder, set the CD / DVD tray in the feeder, and press
5 / 45