Canon MP630 SERIES Service Manual Download Page 37

Page: 37 / 47

(5) User mode

MP630 / MP638 --- 3. REPAIR

TABLE OF CONTENTS

Function

Procedures

Remarks

Nozzle check pattern printing

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

Set a sheet of plain paper (A4 or Letter) in

the cassette, or the rear tray if selected.

Print head manual cleaning

- Cleaning both Black and Color:

Perform via the machine operation panel.

- Cleaning Black or Color separately, or both Black and

Color:

Perform from the MP driver Maintenance tab.

Unclogging of the print head nozzles, and

maintenance to keep the print head

conditions good.

If there is a missing portion or white streaks

in the nozzle check pattern printout, perform

this cleaning.

Print head deep cleaning

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

If print head manual cleaning is not effective,

perform this cleaning. Since the deep

cleaning consumes more ink than regular

cleaning, it is recommended to perform deep

cleaning only when necessary.

Automatic print head alignment Perform via the machine operation panel, or from the

MP driver Maintenance tab.

Set 1 sheet of A4 Matte Photo Paper (MP-

101) in the rear tray.

If automatic alignment is not effective,

perform manual print head alignment.

Manual print head alignment

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

Set 3 sheets of plain paper (A4 or Letter) in

the cassette, or the rear tray if selected.

Print head alignment value

printing

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

Confirmation of the current print head

alignment values.

Paper feed roller cleaning

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

The paper feed rollers of the selected paper

source (the rear tray or the cassette) rotate

while being pushed to the paper lifting plate.

Since the rollers will wear out in this

cleaning, it is recommended that you perform

this only when necessary.

Bottom plate cleaning

Perform via the machine operation panel, or from the

MP driver Maintenance tab.

Cleaning of the platen ribs when the back

side of paper gets smeared.

Fold a sheet of plain paper (A4 or Letter) in

half crosswise, then unfold and set it in the

rear tray with the folded ridge facing down.

(No paper feeding from the cassette)

35 / 45

Summary of Contents for MP630 SERIES
















































Search results

Summary of Contents for MP630 SERIES

Reviews:

Related manuals for MP630 SERIES

Brands by name

Popular brands

Canon MP630 SERIES, Service Manual

Search results

Summary of Contents for MP630 SERIES

Reviews:

Related manuals for MP630 SERIES

Brands by name

Popular brands