2-4. Warnings
attempted from the menu.
then perform Card Direct printing.
The paper size is not correct. Check the
page size you have set.
Non-supported size of paper for Camera Direct
printing via PictBridge connection is selected.
Cancel printing on the digital camera. Confirm
the paper size, and print again.
Failed to scan Photo Index Sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
The machine failed in scanning the Photo
Index Sheet.
Press the OK button to clear the error. Confirm
the following, then try again:
- Fill in all the circles on the Photo Index
Sheet.
- Place the sheet in the correct orientation and
position.
Failed to scan handwriting sheet. Check
orientation and position, and make sure
platen and sheet are clean.
The machine failed in scanning the
handwritten Photo Index Sheet.
Failed to scan DVD/CD handwriting
sheet.
Check orientation and position, and
make sure platen and sheet are clean.
The machine failed in scanning the
handwritten DVD / CD sheet.
Failed to scan Photo Index Sheet.
Check for missed and improper
markings.
The machine scanned the Photo Index Sheet,
but markings in the sheet were incorrect.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index Sheet
properly.
- Place the sheet in the correct orientation and
position.
Failed to scan handwriting sheet. Check
for missed and improper markings.
The machine scanned the handwritten Photo
Index Sheet, but markings in the sheet were
incorrect.
Failed to scan DVD/CD handwriting
sheet. Check for missed and improper
markings.
The machine scanned the DVD/CD
handwritten sheet, but markings in the sheet
was incorrect.
Failed to scan. Either document cannot
be scanned or is not placed on the
platen glass.
The machine failed in scanning the document
for Fit-to-page copy.
Press the OK button to clear the error. Correct
the settings, then try the operation again.
Cover is open. Close cover.
The cover was opened during printing.
Close the cover. The LCD returns to the
display before the error occurrence.
Scanner is not operating correctly.
The CIS cannot detect the home position, or
the scanner unit warming-up is not performed
properly at power-on.
Press the OK button to clear the error, and turn
the machine off and on again. If the error still
occurs, repair servicing is required.
Warning
Message on the LCD
Solution
Low ink
"!" is indicated for an applicable ink tank icon in the
Status Monitor.
Since the ink will be used up soon, prepare for a new
ink tank.
Print head temperature
rise
If the print head temperature does not fall, the print
head error will occur.
When the print head temperature falls, the error is
automatically cleared. If the print head error is
indicated, repair servicing is required.
Protection of excess rise
of the print head
temperature
If the print head temperature does not fall, the print
head error will occur.
If the print head temperature exceeds the specified
limit, an intermission is inserted during printing.
Restrictions on paper
The current paper cannot be set. Change the size and
type.
Re-select the supported paper type and size.
USB cable not connected Set the PC to start scan.
Connect the USB cable, then turn on the computer.
Cancellation of image
select information
Reset the selected photo information?
Yes No
- Select
Yes
, and press the OK button.
=> The image selection is cancelled, and the
menu or sub-menu is displayed.
- Select
No
, and press the OK button.
=> The LCD returns to the display immediately
before the message was displayed.
Do you want to clear the image scanned from the
photo?
Yes No
Do you want to clear the scanned image and rescan?
Yes No
11 / 45
