2-3. Other Error Messages
Message on the LCD
Cause
Solution
The selected paper cannot be fed from
cassette. Change the paper source and
press [OK].
The paper type being used is not supported for
paper feeding from the cassette.
Change the paper source to the rear tray.
Cannot apply the following setting(s).
Change the setting(s).
Settings made conflict each other. (e.g.
Selecting borderless printing on plain paper)
Change the settings so that they will not
conflict each other.
Device memory is full. Cannot continue
process. Reduce the number of
documents (photos, etc.) to scan or
copy.
The memory is not sufficient to do the print
job in copying.
Reduce the amount of data to be printed, or
print from a computer.
Press [Color].
The Black button was pressed, but it is invalid. A temporary error. Press the Color button to
continue the operation.
Press [Black].
The Color button was pressed, but it is invalid. A temporary error. Press the Black button to
continue the operation.
There are no photos in memory card.
Supported image files are not in the memory
card.
A temporary error.
- Confirm that supported image files are in the
memory card.
- Images with double-byte characters used in
the file name (or folder name) may not be
recognized. Change the file (or folder) name
so that it contains only single-byte
alphanumeric characters.
- If images are edited on the computer, print
them from the computer.
The value exceeds the number of copies
you can print.
During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999.
A temporary error. The last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Memory card is not set. Insert the card
after checking the direction.
The memory card is not inserted in the slot
properly.
Set a memory card properly.
DPOF information is not saved.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory card.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
The number of copies to print is not set.
Input the number of copies using [+]/[-
].
Printing was attempted with the print quantity
left "0" (zero).
A temporary error. Specify the print quantity.
This layout is available only for A4 or
8.5"x11"(215x279).
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4 or
Letter.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
Cannot specify "stickers" and "half-side
layout" together. Check markings on
handwriting sheet.
The selected layout on the handwriting sheet is
not supported for Stickers.
A temporary error. Press the OK button to
clear the error. The LCD returns to the display
before the error occurrence.
Cannot print via wireless
communication.
- No photo data
- Unsupported photo data
- Photo data too large
The received data via infrared communication
is not image data.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
Change the setting after removing the
card.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
The card is currently writable from PC.
Set to [Not writable from PC].
With the memory card set to "Writable from
PC," Card Direct printing operation was
A temporary error. Remove the memory card,
change the memory card setting to Read-only,
10 / 45
