manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 372 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 372

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.

Check5

 Confirm that the media type and the paper size settings correspond with the

loaded paper.

Check6

 Clean the paper feed roller.

Cleaning the Paper Feed Roller

Note

• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.

Check7

 If two or more sheets of paper feed from the cassette at once, clean the inside

of the cassette.

For information on cleaning the inside of the cassette, refer to 

Cleaning the Pad in the Cassette

.

If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after
removing the paper, contact the service center.

372

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments