manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 183 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 183

Cleaning the Pad in the Cassette

If the pad in a cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected.
Follow the procedure below to clean the pad in a cassette.

You need to prepare: cotton swab

1. Pull out the cassette 1 or cassette 2 from the printer, then remove all the paper.

2. Clean the pad (A) sideways with a moistened cotton swab.

Important

• After cleaning the smeared pad, dry it completely.

For an example of the cassette 1:

3. Reload the paper, then insert the cassette into the printer.

Note

• If a message is displayed on the screen after inserting the cassette into the printer, press the 

OK

button.

If the problem is not resolved, contact the service center.

183

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments