Canon MAXIFY iB4060 Online Manual Download Page 135

Page: 135 / 504

3. Slide the paper guide (A) in front and (B) on the right to open the guides.

4. Load the envelopes WITH THE PRINT SIDE FACING DOWN, and place them in the center

of the cassette 1.

The folded flap of the envelope will be faced up as shown in the figure below (C).

C: Rear side

D: Address side

Up to 10 envelopes can be loaded at once.

Note

• Align the envelope stack with the edge of the cassette 1 as shown in the figure below.

If the envelopes are in contact with the protrusion (E), the envelopes may not be fed properly.

135

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 135 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: