manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 179 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 179

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Press the 

Setup

 button, use the   or   button to select 

Maintenance

, then press the 

OK

button.

LCD and Operation Panel

3. Use the   or   button to select 

Roller cleaning

, then press the 

OK

 button.

4. Remove any paper from the cassette.

Note

• If a message is displayed on the screen after inserting the cassette into the printer, press the 

OK

button.

5. Use the   or   button to select the paper source to clean (

Cassette 1

 or 

Cassette 2

),

then press the 

OK

 button.

The paper feed roller will rotate as it is cleaned.

6. Make sure that the paper feed roller has stopped rotating, then load three sheets of A4 or

Letter-sized plain paper in the paper source you selected in step 5.

After inserting the cassette into the printer, the paper information registration screen is displayed on the
LCD. Select 

A4

 or 

Letter

 for 

Size:

 and 

Plain paper

 for 

Type:

, then press the 

OK

 button.

7. Extend the output tray extension, then open the paper output support.

8. Press the 

OK

 button again.

The printer starts cleaning. The cleaning will be complete when the paper is ejected.

9. Press the 

Back

 button to exit.

179

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments