manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 346 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 346

Cannot Detect the Printer When Setting up Network
Communication

If the printer could not be detected on the network when setting up the network communication, confirm the
network settings before redetecting the printer.

Cannot Detect the Printer during Wireless LAN Setup: Check 1

Cannot Detect the Printer during Wired LAN Setup: Check 1

Important

• If the printer cannot be detected while you are setting up the network communication using a USB

cable, the printer may be in the access point mode. In this case, finish the access point mode and
enable the wireless LAN, then try to redetect the printer.

Using the Printer with the Access Point Mode

346

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments