Home
/
Canon
/
MAXIFY iB4060
/
Online Manual

Canon MAXIFY iB4060, Online Manual, Page: 339 / 504

Share

Page: 339 / 504

Canon MAXIFY iB4060 Online Manual Download Page 339

The Printer Stopped Working Suddenly

Cannot Communicate with the Printer over the Wireless LAN

Cannot Communicate with the Printer Using the Access Point Mode

Cannot Communicate with the Printer over the Wired LAN

Cannot Print from a Computer Connected to the Network

Cannot Communicate with the Printer over the Wireless LAN

Check1

Make sure that the printer is turned on.

Check2

Make sure that the network settings in the printer are identical with those of

the access point.

Refer to the instruction manual provided with the access point or contact its manufacturer to check the access
point settings, and then modify the printer settings.

How to Set an Encryption Key

Check3

Make sure that the printer is not placed far away from the access point.

The access point is located indoors within the effective range for wireless communication. Locate the printer
within 164 ft. / 50 m from the access point.

Check4

Make sure that there is no obstruction.

Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.

Check5

Make sure that there is no source of radio wave interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.

Check6

Make sure that the network settings of the computer are correct.

For the procedures to connect a network device to the computer and set them up, refer to the instruction
manual of your network device or contact its manufacturer.

Check7

Make sure that the radio status is good and adjust the installation positions

while monitoring the radio status with IJ Network Tool.

Monitoring Wireless Network Status

Check8

Make sure that a valid wireless channel is used.

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.

339

«
...
337
338
339
340
341
...
»

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments