Canon MAXIFY iB4060 Online Manual Download Page 229

Page: 229 / 504

Note

• Signal strength is displayed as follows.

: Good

: Fair

: Poor

• Type of encryption is displayed as follows.

Blank: No encryption

WEP

: WEP is set

WPA/WPA2

: WPA/WPA2 is set

Refresh

Click to update the list of access points when your target access point is not detected.

If the target access point is set to a closed network (the stealth mode), click

Cancel

to return to the

previous screen and enter the network name (SSID) in

Network (SSID)

Note

• Make sure that the access point is turned on.

Set

Click to set the network name (SSID) in

Network (SSID):

on the

Wireless LAN

sheet.

Note

• The

WEP Details

screen or the

WPA/WPA2 Details

screen appears if the selected access

point is encrypted. In this case, configure the details to use the same encryption settings set
to the access point.

• Access points that cannot be used by this machine (including those configured to use different

encryption methods) are displayed grayed out and cannot be configured.

229

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 229 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: