manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 341 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 341

Check7

 Make sure that there is no source of radio wave interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.

Check8

 Are you trying to connect 6 devices or more?

You can connect up to 5 devices using the access point mode.

Cannot Communicate with the Printer over the Wired LAN

Check1

 Make sure that the printer is turned on.

Check2

 Make sure that the LAN cable is connected properly.

Make sure that the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the
cable properly.

If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.

If the problem is not resolved, perform setup again according to the instructions on our website.

Cannot Print from a Computer Connected to the Network

Check1

 Make sure that the network settings of the computer are correct.

For the procedures to set up the computer, refer to the instruction manual of your computer or contact its
manufacturer.

Check2

 If the printer driver is not installed, install it.

Install the printer driver from our website.

Check3

 When using wireless LAN, make sure that access control is not set to the

access point.

For the procedures to connect an access point and set it up, refer to the instruction manual of your access
point or contact its manufacturer.

Note

• To check the MAC address or the IP address of the computer, see 

Checking the IP Address or the MAC

Address of the Computer

.

341

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments