Canon MAXIFY iB4060 Online Manual Download Page 353

Page: 353 / 504

Cannot Detect the Printer during Wired LAN Setup: Check 2

Are the computer and the router configured and can the computer connect
to the network?

Make sure that you can view web pages on your computer.

If you cannot view any web pages:

Click

Cancel

on the

Check Printer Settings

screen to cancel to set up the network communication. After

that, configure the computer and network device.

For the procedures, refer to the instruction manuals supplied with the computer and network device, or
contact their manufacturers.

If you can view web pages after configuring the computer and network device, try to set up the network
communication from the beginning.

If you can view web pages:

Go to check 3.

Cannot Detect the Printer during Wired LAN Setup: Check 3

353

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 353 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: