manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 356 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 356

Check11

 Make sure that the firewall of the security software is disabled.

If the firewall function of your security software is turned on, a message may appear warning that Canon
software is attempting to access the network. If the warning message appears, set the security software to
always allow access.

If using any programs that switch the network environment, check their settings. Some programs will enable a
firewall by default.

Check12

 When using a router, connect the printer and computer to the LAN side (same

network segment).

Check13

 When the printer is connected to an AirPort Base Station via a LAN, use

alphanumeric characters for the name of the network (SSID).

If the problem is not resolved, perform setup again according to the instructions on our website.

356

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments