Canon MAXIFY iB4060 Online Manual Download Page 384

Page: 384 / 504

If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become
wavy, causing paper abrasion.

Reduce the intensity setting in the printer driver and try printing again.

1. Open the Print dialog.

How to Open the Printer Driver Setup Window

2. Select

Color Options

in the pop-up menu.

3. Drag the

Intensity

slide bar to set the intensity.

Check6

Is printing performed beyond the recommended printing area?

If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.

Resize your original document in your application software.

Printing Area

Check7

Is the paper feed roller dirty?

Clean the paper feed roller.

Cleaning the Paper Feed Roller

Note

• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.

Check8

Is the inside of the printer dirty?

When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to
become smudged.

Perform the Bottom Plate Cleaning to clean the inside of the printer.

Cleaning the Inside of the Printer (Bottom Plate Cleaning)

Note

• To prevent the inside of the printer from stains, set the paper size correctly.

Check9

Set the time to dry the printed surface longer.

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.

1. Make sure that the printer is turned on.

2. Open the Canon IJ Printer Utility.

Opening the Canon IJ Printer Utility

3. Select

Custom Settings

in the pop-up menu.

4. Drag the

Ink Drying Wait Time:

slide bar to set the wait time, and then click

Apply

5. Confirm the message and click

384

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 384 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: