Canon LBP-2000, Service Manual

Page: 124 / 222

CHAPTER 3
3 - 14
9) Remove the flexible cable [12], 5 screws
[13], and lock support [14]; then, detach
the DC controller PCB [15].
[12]
[13]
[13]
[14]
[15]
Figure 3-2-24
Caution: When mounting the printer top
unit, be sure to hold it by the left
and right rails; then, fit it in the
frame holes while holding it hori-
zontal and paying attention to the
screw holes [16] on the base plate.
[16]
[16]
Figure 3-2-25
D . Power Supply PCB Assembly
1 . Removing the power supply PCB
See II-C-1 ‘Removing the DC Controller PCB’
for an outline of the flow of work used to dis-
assemble/assemble the PCBs.
1) Remove the printer top unit. (See II-C-1
‘Removing the DC Controller PCB.’)
2) Remove the flexible cable [1] and 7 screws
[2]; then, detach the power supply PCB
[3].
[1]
[2]
[2]
[3]
Figure 3-2-26