Canon LBP-2000, Service Manual

Page: 156 / 222

4 - 5
CHAPTER 4
C . Test Print
Test printing takes either of two forms: engine test printing or controller test printing. If a fault
occurs in the Printer, make a test print to identify the symptom.
1 . Engine test printing
The Printer has a pattern consisting of horizontal lines (at intervals of about 0.6 mm). The Test
Print switch is found at the rear of the Printer (Figure 1-4-2). After making sure that the photosen-
sitive drum is at rest and the Printer is in standby state, press the switch once to generate a single
test pattern. Hold down the switch to generate test patterns in sequence.
A source of paper may be selected for test printing. If the selected source is without paper, the
internal cassette will be used.
7-mm margin (approx.) 7-mm margin (approx.)
2-mm margin (approx.)
Leading edge
3-mm margin (approx.)
Figure 4-1-2
2 . Controller test printing
The following items can be by selecting and executting a TEST MENU:
• SHOW PAGE COUNT
Indicates the total number of pages printed; according to paper size, i.e., small or large.
The page count prints in the TEST PRINT.
• TEST PRINT
Make a TEST PRINT. The Test Print lists the printing enviorment setting and also displays the
graphic and text printing capabilities. (See to Figure 4-1-3)
• PRINT PS FONTS
Available only after the Translator Module A-65 for Adobe PostScript Level 3 module is in-
stalled. Prints the PS demonstration page.
• PRINT PCL FONTS
Prints the PCL Font list.