manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 96 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 96

4-6

Paper Handling

Chapter 4

When you are printing, follow these guidelines:

❏

Always set the paper delivery selector before starting to print.

❏

Do not switch the paper delivery selector until the printout comes out 
of the delivery slot completely. Otherwise, a paper jam may occur.

❏

Make sure there is enough room for the paper to exit from the face-up 
delivery slot.

❏

Never pull the paper as it comes out of the unit.

❏

When using face-up delivery, let the paper slide onto the extension 
tray.

❏

When using face-up delivery, remove each sheet as it is delivered 
through the face-up delivery slot.

❏

When using the multi-purpose tray, be careful not to let any foreign 
object, such as your necktie, necklace, hair, etc. enter into the feeder.

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments