Canon Laser Class 2060 User Manual Download Page 144

Page: 144 / 350

6-4

Sending Faxes

Chapter 6

Problem documents

❏

To prevent paper jams in the Automatic Document Feeder (ADF), do
not use any of the following paper in the LASER CLASS 2060:

❏

Remove all staples, paper clips, or any other fasteners before loading
the document into the Automatic Document Feeder (ADF).

❏

Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading the document into the Automatic
Document Feeder (ADF).

❏

If you have a document that will not feed into the LASER CLASS
2060 properly, make a photocopy of the document, then load the copy
instead.

WRINKLED OR
CREASED PAPER

CURLED OR
ROLLED PAPER

TORN PAPER

CARBON PAPER OR
CARBON-BACKED
PAPER

COATED PAPER

ONION SKIN OR
THIN PAPER

Summary of Contents for Laser Class 2060































































































































































































































































































































































Search results

Summary of Contents for Laser Class 2060

Reviews:

Canon Laser Class 2060, User Manual, Page: 144 / 350

Search results

Summary of Contents for Laser Class 2060

Reviews: