manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 119 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 119

Sp

eed

 Di

al

in

g

Chapter 5

Speed Dialing

5-11

3.

Press Start/Copy.

❏

If you do not press the Start/Copy button within five seconds of 
pressing the One-Touch Speed Dialing button, the LASER 
CLASS 2060 will begin sending automatically. If you do not want 
the LASER CLASS 2060 to send automatically, you need to 
change the TIME OUT setting. See pages 15-7 and 15-8 for more 
details.

❏

If an error occurs during sending, the LASER CLASS 2060 will 
print an error report. If this happens, try sending the fax again. 
See “Faxing Problems” on page 13-26 for details about errors.

You can also use One-Touch Speed Dialing to send a document to more 
than one location at a time. For details, see “Sequential Broadcasting” on 
page 6-31.

Start / Copy

N

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments