manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 139 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 139

Sp

eed

 Di

al

in

g

Chapter 5

Speed Dialing

5-31

4.

Press 

N

 or 

M

 to display the other names and numbers registered for 

the button letter group.

❏

The names for One-Touch Speed Dial are prefixed with two 
digits and the names for Coded Speed Dial are prefixed with an 
asterisk ( ) and two digits.

❏

When you reach the last number and name registered for the 
letter group, you will return to the first number and name in the 
group.

❏

After you press 

N

 or 

M

, if the display does not change, this 

means only one name and number is registered for the button 
you just pressed.

❏

To see numbers and names registered for other letter groups, 
ABC for example, you will have to press the ABC button.

❏

After you press a button, if you see NO TEL # in the display, this 
means there are no names that begin with a letter of the button 
you just pressed.

5.

With the telephone number you want to dial displayed, press Start/
Copy

 to start the document transmission.

T E L =

8 3 3 4 4 2 4

0 1 A D A M B O O K S . C A P

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments