manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 77 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 77

S

e

tti

n

g

 Up

 Yo

u

r 

LAS

E

R CLAS

S

 

2060

Chapter 2

Setting Up Your LASER CLASS 2060

2-45

3.

Insert the stack of paper—print side facing you and top edge first into 
the multi-purpose tray.

❏

Insert the stack until it stops, but do not force it in.

4.

Adjust the paper guides to the width of the paper.

❏

Make sure there is no space between the paper guides and the 
stack of paper.

Your LASER CLASS 2060 is now ready to print.

Let the paper run out before you refill the multi-purpose tray. Avoid 
mixing new paper with paper remaining in the multi-purpose tray.

NO SPACE

PAPER

PAPER GUIDES

TOP VIEW

N

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments