manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 228 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 228

11-4

Making Copies

Chapter 11

6.

Press Start/Copy to begin copying.

❏

To stop copying, press the Stop button. You may then need to lift 
the operation panel to remove the document. See “Jams in the 
Automatic Document Feeder (ADF)?” on page 13-5.

If MEMORY FULL appears in the display while you are making multiple 
copies of a document, you will not be able to use the multiple copy 
feature for copying the document. Instead, make single copies of the 
document (as many times as required). To correct this situation, delete, 
print, or send any documents stored in memory. See “Documents Stored 
in Memory” on page 8-2.

Start / Copy

C O P Y

N

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments