manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 230 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 230

12-2

Reports and Lists

Chapter 12

Activity Report

The Activity Report is printed out automatically by the LASER CLASS 
2060 after every 20 sending and receiving transactions. This report lists 
the details of the faxes you have sent or received so that you can keep 
track of the transaction operations your LASER CLASS 2060 has 
performed.

❏

LASER CLASS 2060 prints sending and receiving transactions 
together in the same report.

❏

When sending a document to many locations (Broadcast), the 
transaction number will be the same for each transmission in the 
group.

You can also print the Activity Report manually if you want to check the 
report before the 20 transactions are completed. Follow this procedure to 
print the Activity Report.

1.

Open One-Touch Speed Dial panel.

2.

Press Report. 

Report

R E P O R T

1 . A C T I V I T Y R E P O R T

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments