manualshive.com logo in svg

Canon Laser Class 2060, User Manual, Page: 251 / 350

Share
Download
Canon Laser Class 2060 User Manual Download Page 251

Fr

e

q

u

e

nt

ly

 As

k

e

d

 

Q

u

est

io

n

s

Chapter 13

Frequently Asked Questions

13-7

5.

If you have a multi-page document, remove the entire document 
from the Automatic Document Feeder (ADF), and reload it.

Jams in the Output Slots?

Use this procedure if the recording paper jams or misfeeds in the output 
slots. If this happens, the message REC. PAPER JAM appears in the LCD 
display.

1.

Gently pull any jammed paper out of the unit as shown.

2.

If you are using the multi-purpose tray, remove the paper stack from 
the multi-purpose tray and reload it, following the instructions in 
“Loading Recording Paper” on page 2-39.

If the paper jam occurred while a fax was being received into the LASER 
CLASS 2060 memory, that fax will print automatically when the jam is 
cleared.

N

Summary of Contents for Laser Class 2060































































































































































































































































































































































Reviews:

No comments