Canon IXUS 245 HS User Manual Download Page 237

Page: 237 / 284

237

Printing Images

Available Layout Options

Default

Matches current printer settings.

Bordered

Prints with blank space around the image.

Borderless

Borderless, edge‑to‑edge printing.

N‑up

Choose how many images to print per sheet.

ID Photo

Prints images for identification purposes.

Only available for images with a resolution of L and an aspect ratio of

4:3.

Fixed Size

Choose the print size.

Choose from 3.5 x 5 in., postcard, or wide‑format prints.

Still Images

Printing ID Photos

Choose [ID Photo].

Following steps 1 – 4 on

236, choose

[ID Photo] and touch [Next].

Choose the long and short side

length.

Touch an item to choose it. Touch [

]

[

] to choose the length, and then touch

[Cropping].

Choose the printing area.

Follow step 2 on

235 to choose the

printing area.

Print the image.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands