Canon IXUS 245 HS User Manual Download Page 235

Page: 235 / 284

235

Printing Images

Still Images

Cropping Images Before Printing (Cropping)

By cropping images before printing, you can print a desired image area

instead of the entire image.

Choose [Cropping].

After following step 1 on

234 to

access the printing screen, touch

[Cropping].

A cropping frame is now displayed,

indicating the image area to print.

Adjust the cropping frame as

needed.

To resize the frame, move the zoom

lever.

To move the frame, drag it.

To rotate the frame, touch [ ].

Touch [OK] to complete the setting.

Print the image.

Follow step 7 on

233 to print.

•

Cropping may not be possible at small image sizes, or at some

aspect ratios.

•

Dates may not be printed correctly if you crop images shot with

[Date Stamp] selected.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Brands by name

Popular brands